TortConn2 Edge Connector for Tortoise Switch Machine
(You save $1.00)
- New design fits Tortoise machines snugger.
- Reduced connector sliding back and forth on Tortoise machine.
- Plugs directly onto Tortoise PCB card edge.
- Solder Terminals for easy wiring ahead of time on the bench.
easy to use
especially in pairs to easily change polarity.
Better than wiring directly to the switch machine
The terminal are very small and connecting anything larger than 22 Gage is difficult. But does mean you can wire the power either way and plug the connector to the switch machine. If the switch works backwards just reverse the connector.
A word of caution if using dual diodes on the middle connectors, The tortoise switch machine works slowly and has make before break contacts. I started a fire as the 26 gage wire on the diode got red hot before it melted.