UA-5470942-1

Site Information

Loading... Please wait...

Tortoise Card Edge Connector for Tortoise Switch Machine

$4.50 $3.39 (You save $1.11)

ACL-1000
0.02 LBS
Calculated at checkout

Features

  • New design fits Tortoise machines snugger.
  • Reduced connector sliding back and forth on Tortoise machine.
  • Plugs directly onto Tortoise PCB card edge.
  • Solder Terminals for easy wiring ahead of time on the bench.
Write Review

  1. easy to use 5

    Posted by Wally Filkins on Apr 20th 2016

    especially in pairs to easily change polarity.

  2. Better than wiring directly to the switch machine 2

    Posted by Larry Kelly on Sep 15th 2015

    The terminal are very small and connecting anything larger than 22 Gage is difficult. But does mean you can wire the power either way and plug the connector to the switch machine. If the switch works backwards just reverse the connector.

    A word of caution if using dual diodes on the middle connectors, The tortoise switch machine works slowly and has make before break contacts. I started a fire as the 26 gage wire on the diode got red hot before it melted.