Works great for creating a trolley shuttle back and forth with intermediate station stops between the ends of the shuttle.
The Circuitron AR-2 is a sophisticated, integrated circuit design, automatic polarity reverser for use on point to point layouts in any scale.
The AR-2 provides a 5 Amp reversing capacity and also incorporates an adjustable time delay circuit that will stop a train at each reversing point for a set period of time before reversing the direction. This time delay is adjustable from 0 to over 1 minute.
In addition, a terminal is provided for external activation of the time delay circuitry without reversing direction. This terminal can be connected to a panel pushbutton or to the output of one of CIRCUITRON's detection circuits to permit stop and delays at any point.
If a DT-4 Rolling Stock Detector is used in conjunction with the AR-2, up to 4 intermediate stopping points can be established between the reversing points. This is ideal for trolley or switching setups where you would like to have a train shuttling between end points, making various stops along the way.
The AR-2 is constructed on a 3 square printed circuit board and requires a 12-18 volt AC or DC power supply for proper operation.
NOTE: This item is not for use as a DCC Auto Reverser. Please see our Power Managment Section for DCC auto reversers.
** Due to higher track voltage requirements, this item is not suitable for Z Scale.**
3 Reviews Hide Reviews Show Reviews
Cost effective way to get great sound for your RR.
The AR-2 performs very well and is a fine product. The circuit adds realism to my HO model layout.
This product is simple to install. Great paperwork for programming, easy to understand.