A great basic two function decoder with a wire harness for less than $20.00!
- 1.5 Amp (2.0 Amps Peak)
- Two (2) Function Outputs .5 Amp Total Capacity
- FX3 Lighting Effects
- Series 6 Decoder
- For use with PX112-2 Power XTender (keep alive)
- Digitrax 9 pin to 3.5" (88mm) Wire Harness
- .672 x 1.074 x .259 (17.08mm x 27.28mm x 6.6mm)
- Digitrax No Worries Warranty
2 Reviews Hide Reviews Show Reviews
I bought a few of these for some ~25-year-old Hornby trains I'm adding to a new layout. I built and wrote my own DCC controller, and the decoders worked fine with it. I had some trouble with one loco due to the motor being electrically connected to the floor plate, but Digitrax has a "no worries warranty" and will replace the decoder. In another, a diesel loco, the motor was properly isolated and I got it up and running in minutes. The train's behavior at low speed with the decoder (PWM output) is superior to how it ran under DC control, too.
There is no better value in JST DCC decoders than the four function D13SRJ for which there is insufficient room in the Genesis GP7/9 Locomotives for installation. The DH126D is the next affordable option for filling the need for a non-sound HO sized JST mobile DCC decoder in the Genesis Geeps.