Created with Sketch. Created with Sketch.

Shop by Category

Electrical

  • 1/2" x 36 yards 2.5 Mil Kapton Tape

    Features This tape offers optimum performance in electrical and thermal insulation making it ideal for decoder installations. It offers flame resistant electrical insulation and can be used as a wire and cable wrap. Rolls of Kapton Tape are 36 yards...

    MSRP: $16.95
    $13.95
    Add to Cart
  • 1/4" x 36 yards 2.5 Mil Kapton Tape

    Features This tape offers optimum performance in electrical and thermal insulation making it ideal for decoder installations. It offers flame resistant electrical insulation and can be used as a wire and cable wrap. Rolls of Kapton Tape are 36 yards...

    MSRP: $11.95
    $9.95
    Add to Cart
  • 3mm Golden White LED

    Great for use in locomotives to represent older incandescent headlights. It looks orange, but when lit glows a brilliant Golden color. Features Color: Golden White Size: 3mm Voltage: 3.0V Amperage: 30mA Brightness: 2900 mcd

    MSRP: $1.50
    $1.40
    Add to Cart
  • 3mm Golden White LED 2pk w/ Resistors

    Two pack of 3mm Golden White LEDs including 1k dropping resistors. Great for use in locomotives to represent older incandescent headlights. They look orange, but when lit glows a brilliant Golden color. Features Package contains two LEDs and two 1K,...

    MSRP: $3.50
    $2.95
    Add to Cart
  • 3mm Sunny White LED

    Great for use in locomotives to represent modern headlights. Features Color: Sunny White Size: 3mm Voltage: 3.0V Amperage: 30mA Brightness: 2900 mcd  

    MSRP: $1.50
    $1.40
    Add to Cart
  • 3mm Sunny White LED 2pk w/ Resistors

    Two pack of 3mm Sunny White LEDs with 1k dropping resistors. Great for use in locomotives to represent modern headlights. Features Package contains two LEDs and two 1K, 1/4 Watt Resistors Color: Sunny White Size: 3mm Voltage: 3.0V Amperage:...

    MSRP: $3.50
    $2.95
    Add to Cart
  • Accu-Lites Jumpers for PM42 Breakout Board

    The Acculites PM42 Breakout Board has only one pair of jumpers included for setting up a reversing section with your PM42. These extra jumpers are for adding more reversing sections when wiring the PM42 Breakout Board. Package contains two jumpers.

    $2.95
    Add to Cart
  • Accu-Lites PM42 Breakout Board for Digitrax PM42

    The PM42 breakout board brings out all the connections available on the Digitrax PM42 to easy access screw terminals. The PM42 breakout board is setup to accept up to 2 inputs and 4 distinct outputs. Each output uses a set of jumpers that allows you to...

    MSRP: $35.00
    $27.95
    Add to Cart
  • Accu-Lites SE8C Breakout Board for Digitrax SE8C

    Breakout board for the Digitrax SE8C. The SE8C breakout board brings out all the connections available on the Digitrax SE8C to easy access screw terminals. This includes the 8 slow motion switch machine drivers, the 8 pushbutton inputs and the 8 sensor...

    MSRP: $38.00
    $30.95
    Add to Cart
  • Atlas 200 Snap Relay

    Atlas 200 Snap Relay

    A double-pole, double-throw relay with actuating mechanism driven by a momentary-power, twin coil solenoid*.  With just a few simple connections, this small device, which may be mounted anywhere, can: Power the frogs on Atlas' #6 turnouts...

    MSRP: $16.95
    $13.95
    Add to Cart
  • Atlas 205 Connector

    A device to turn electric power on or off to track sections or accessories. Has three SPST on-off switches. Can be coupled together in any number.

    MSRP: $12.95
    $10.39
    Add to Cart
  • Atlas 210 Twin

    A component consisting of two double-pole, double-throw reversing switches wired in parallel. Useful for reversing section and turntable control on single-cab layouts, plus many other applications.

    MSRP: $12.95
    $10.39
    Add to Cart
  • Atlas 215 Selector

    This device enables the operation and control of two trains at the same time on a DC Analog Layout. Has four single-pole, double-throw switches to provide two-cab operation for four blocks. May be ganged together in any number to control additional...

    MSRP: $12.95
    $10.39
    Add to Cart
  • Atlas 220 Controller

    For DC Analog Layouts, this control provides the simplest way to wire and control tricky reverse loops, wyes and turntables. Has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops,...

    MSRP: $13.95
    $10.99
    Add to Cart
  • Atlas 312 5-Conductor Ribbon Wire, 50' Atlas 312 5-Conductor Ribbon Wire, 50'

    Atlas 312 5-Conductor Ribbon Wire, 50'

     Atlas 312 HO N Scale 5 Conductor Ribbon Wire 50'  Contains 50' of 5 conductor stranded ribbon wire that can be used with any scale Atlas switch machines. Also can be used as layout wire.  Features Makes wiring your layout easier than...

    MSRP: $31.95
    $23.95
    Add to Cart