The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click OK to Accept Cookies to continue to use the site.
The Dual Frog Juicer is more feature rich than the Mono Frog Juicer and can be configured for use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or crossing. It also can handle loads up to 10 amps.
The Dual Frog...
The PM42 breakout board brings out all the connections available on the Digitrax PM42 to easy access screw terminals.
The PM42 breakout board is setup to accept up to 2 inputs and 4 distinct outputs.
Each output uses a set of jumpers that allows you to...
BDL168 Multi Zone Breakout Board for EZ wiring!
The BDL168 Multi Zone breakout board brings out all the connections available on the Digitrax BDL168 to easy access screw terminals.
Multi Zone Operation
This design has 4 inputs separate inputs,...
SNAPS! is a wiring connector for the Tortoise Slow Motion Switch Machine.
It is composed of an edge connector that SNAPS onto the Tortoise and an 8 position terminal block for wiring the Tortoise.
Terminal block accepts wire from #14 - 22 AWG...
Breakout board for the Digitrax SE8C.
The SE8C breakout board brings out all the connections available on the Digitrax SE8C to easy access screw terminals.
This includes the 8 slow motion switch machine drivers, the 8 pushbutton inputs and the 8 sensor...
The PSX1 is an intelligent solid state DCC circuit breaker for one power district. It features an adjustable trip rating, feedback and more.
Includes one DCC circuit breaker to control one power district.
All Solid State Operation: Fast,...
NEM651 6-Pin Socket.
NEM652 8-Pin Socket.
21-Pin MTC Interface.
Terminal Block for connection of wire harness decoders.
Terminal Block for connection to DCC system or programmer device.
BDL168 Single Zone Breakout Board for EZ wiring!
The BDL168 Single Zone breakout board brings out all the connections available on the Digitrax BDL168 to easy access screw terminals.
Single Zone Operation
This design has a single input, meaning...
Add this USB computer interface for computer programming and/or operation of your Power Cab equipped layout. Requires USB cable, computer and railroad computer program such as JMRI Decoder Pro and Panel Pro.
All new easy programming!
Control for 2 Tortoise switch machines
Remembers the position of switch during power outages
Supports the full range of DCC accessory addresses (1-2044)
Easy address programming, no need to connect it to...
Low cost basic DCC Auto Reverser and Circuit Breaker that works great for Reverse Loops, Wyes and Turntables.
Includes integrated circuit breaker function not offered in other low cost auto-reversers manufactured by Digitrax, Lenz and...
The Power Pax safely boosts programming power and gives you hassle-free programming of Atlas, BLI and Proto 2000 locomotives with QSI Quantum Sound - Soundtraxx and multiple decoder/loco combinations.
Recommended for and compatible with Digitrax, Lenz,...
Contains twenty pair of NO.5® Metal Universal Kadee® Couplers with phosphor bronze metal Centering Springs.
20 pair per package
Case of 25 pieces
Flexible for use in curves
Beveled edges for realistic ballast profile
Dimensions (in): 3/16" x 1-3/4" x 36"
Dimensions (cm): .48 x 4.45 x 91.44
Note: This item is very heavy and has a flat ship rate.
Five pieces of HO-Scale 36" flex track with code 83 nickel silver rail and brown plastic ties. Code 83 has become the choice of discriminating prototype modelers as it has the most realistic look.
Five (5) pieces of flex track
The #148 coupler will work anywhere a NO.5® Coupler will work. The #148 coupler is a direct replacement for most Bachmann On30 couplers & a direct replacement for any plastic Medium Centerset "clone" couplers.
The #148 Kadee®...
Package includes five (5) Blue Point Turnout Controllers
Suitable for scales N through O.
Compact size fits easily under bench work.
Two sets of contacts rated at 5 Amps.
Contacts may be used for powering frogs or with signal systems...
The MRC Light Genie is a wireless lighting control system for Model Trains and Railroads.
The Light Genie is great for Model Railroads, Models & Dioramas, Educational Projects, Arts & Crafts, Home Decor, Table Decorations and more.
The PTB-100 Programming Track Booster is a handy tool for anyone who uses DCC sound decoders. Many sound decoders such as from Soundtraxx and QSI draw more current while being programmed than a regular motor and lighting only decoder. The...
The Wabbit DCC stationary decoder operates 2 DC stall motor type switch machines such as Tortoise and features the same patented unmatched performance of its popular kin the Hare. Features
Auto Throw Automatically throws points when a train is...
Ideal for use with the the NCE Switch-It, Switch-8, and most other stationary decoders. The Mini-Panel is primarily intended to make it easy to build control panels for interlockings and other layout applications. The Mini-Panel can also be used to...
The Nebo Tools REBEL is a fully rechargeable task light that includes an adjustable head strap for use as a head lamp. Small enough to fit in the palm of your hand, this powerful light rebels against its size with its impressive 600 lumen output. This...
Save your layout and models from the danger of spilling liquid from drinks while you're working or operating with the new adjustable folding drink and tool holder.
Includes five cup holders with mounting screws
Adjustable width will hold...
These pedestal type crossing gate/signals feature cast metal construction with red/white hand painted gate arms. Each gate lowers when activated by remote activator (sold separately). They also have red LEDs facing in both directions.
Gates may be...