The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click OK to Accept Cookies to continue to use the site.
SNAPS! is a wiring connector for the Tortoise Slow Motion Switch Machine.
It is composed of an edge connector that SNAPS onto the Tortoise and an 8 position terminal block for wiring the Tortoise.
Terminal block accepts wire from #14 - 22 AWG.
New design fits Tortoise machines snugger.
Reduced connector sliding back and forth on Tortoise machine.
Plugs directly onto Tortoise PCB card edge.
Solder Terminals for easy wiring ahead of time on the bench.
Super thin and flexible wire for decoder, lighting & signal installations.
36 AWG Stranded Wire
Outside Diameter 0.5mm (0.02")
10 Meters (30 Feet) of Wire
NMRA Color Coded Insulation (All colors sold separately)
The Mono Frog Juicer is for use with most DCC systems including Lenz, Roco, NCE (including the PowerCab), Digitrax, Zimo, MRC, CVP, SPROG 3 and more.&nbsp; This board is an automatic polarity reverser for a single frog.
Setup is simple, connect...
Two pack of 3mm Sunny White LEDs with 1k dropping resistors. Great for use in locomotives to represent modern headlights.
Package contains two LEDs and two 1K, 1/4 Watt Resistors
Color: Sunny White
The leading general purpose solvent cement for fast, permanent bonding of most dissimilar plastics. Immediately tacky, sets in minutes.
Permanently bonds ABS to Butyrate, ABS to Styrene, ABS to Acrylic and more. Actually dissolves a thin film of the...
Two pack of 3mm Golden White LEDs including 1k dropping resistors. Great for use in locomotives to represent older incandescent headlights. They look orange, but when lit glows a brilliant Golden color.
Package contains two LEDs and two 1K,...
Cleans your track and lays down a non-slippery conductive film that will improve current flow. Will enhance the operation of DCC and Sound Systems.
20-pack. Selected specifically for HO-Scale CMX Clean Machine.
Improve the conductivity of your tracks by keeping them clean with easy-to-use Bright Boy. Great for taking grime off metal loco, freight or passenger car wheels too.
Add a nice touch to your layout with a custom-made throttle pocket to hold your Atlas, CVP EasyDCC, Digitrax, Lenz, MRC or NCE DCC throttles. These pockets are injection molded from durable ABS plastic. Simply screw them to your layout and you're ready...
20-pack. Selected specifically for O-Scale CMX Clean Machines.
Use these handy connectors to tap track feeders to your DCC track power bus or layout accessories to an accessory power bus. Will work for 18-14 AWG Bus (14 AWG with soft insulation) and an 18-22 AWG tap.
Package contains 50 pcs.
Special speaker for HO scale sound applications that provides significantly more bass than their same diameter counterparts.
High Bass Speaker Features
Size - 1.10" (28mm) x 0.52" H (13.2mm)
Enclosure 28 mm (sq) x 13 mm (height).
This tape offers optimum performance in electrical and thermal insulation making it ideal for decoder installations. It offers flame resistant electrical insulation and can be used as a wire and cable wrap.
Rolls of Kapton Tape are 36 yards...
Easy to assemble and use.
Includes a #5 Coupler and #58 "Scale" Coupler.
Provides instant visual reference of proper coupler height.
Accurately measures proper trip pin height above rail.
Shows uncoupler magnet height...
GOO is the All-Purpose adhesive that grips almost anything. It never lets go. GOO is perfect for building or repairing jobs on your layout and around the house.
The easy contact action of GOO produces fast-setting joints with any material. GOO works...
Nicknamed "Suitcase" connectors, these insulation displacement connectors (IDC) allow you to connect track feeder wires to your layout DCC power buss without stripping insulation or soldering.
This connector double pierces each wire for a super reliable...
A Teflon like lubricant that will inhibit rust when applied to metal parts, as well as preventing friction, heat and wear. Compatible with other lubricants and can be applied over them if necessary. Non-staining, non-toxic.
Great for use...
Ten feet of 3/64" heat shrink tubing, the most common size used for DCC decoder installations.
This little tester can test any 20ma LED (any color) without the need for a current limiting resistor. Just snap the tester on a standard 9-volt battery and start testing.
Accidental reverse connection will not harm LED. Accidental shorting of test...
An assortment of heat shrink tubing, in five sizes: 3/64", 1/16", 3/32", 1/8"; and 3/16". Each piece is 5" long. Works great for decoder installations.
Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:
Gauge of track and turnouts