Digitrax PS14 14VDC 300mA Power Supply

The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90 & UR91 and others. Universal AC input 95-240V 50/60Hz USA 2 prong plug, in sideways orientation to fit nicely on a plug...

Miniatronics WT34 3VDC, 200mA Transformer Power Supply

Features Output: 3 Volts DC Input: 120VAC, 60Hz 200mA Current Rating Flexible Wire Leads

NCE P515 15VAC, 5 Amp DCC Power Supply

Model railroading power supply specifically designed for DCC use. It is recommended for Digitrax - Lenz - NCE and other DCC systems. Features Illuminated rocker power switch 5 Amp, 15 VAC Output, Input 120 VAC, 60Hz Sealed unit - impact...

Miniatronics WT16 16VAC 800mA Transformer Power Supply

Features Output: 16 Volts AC Input: 120VAC, 60Hz 800mA Current Rating Flexible Wire Leads

Miniatronics WT12 12VDC 1000mA Transformer Power Supply

This transformer is perfect for those times you must have 12 volts DC and can not exceed those specifications. 12 volt bulbs will last much longer using a regulated transformer thus avoiding a failure due to higher voltage surging through your bulbs...

NCE P114 Power Supply for Power Cab

An additional or replacement DC power supply for the Power Cab system and other model railroad uses. Input 120VAC/220VAC, output 13.5VDC.

Walthers 942-110 Layout Control System 2 Amp 12V DC Power Supply

Features 12V filtered DC power designed especially for Walthers Layout Control System. Powers up to 16 switch machines using Distribution Blocks (#942-111, sold separately) Perfect for powering all types of DC layout accessories.

Digitrax PS615 90W AC/DC 15VDC 6 Amp Power Supply

The PS615 power supply is for use with all Digitrax Command Stations and Boosters operating at 5 amps. Features High-efficiency power supply 6 Amp Capacity 15 VDC Output Accepts different cord sets Meets MEPS VI and DOE VI...

Digitrax PS2012E 20 Amp Power Supply 13.8-23VDC

This power supply replaces the PS2012 to meet new efficiency requirements for DC power supplies. It delivers more power with less heat for more efficient operation. The 20 amp PS2012E regulated power supply can be used to operate up to 4 five amp...

Digitrax PSYC52 Y Cable for PS2012

Use to connect multiple DCC Power Boosters to a single power supply such as the Digitrax PS2012 or Crest 55465. Features For use with PS2012 power supplies or similar. Each Y Cable comes with dual 5 amp protected outputs Up to 24 volt AC...

NCE Brutis 10 Amp, 18 Volt Power Supply

An enclosed and wired, 10-12 Amp power supply for use with the NCE PH-Pro 10, PH-Pro 10R, PB110 Booster and Digitrax Super Chief 8 Amp systems. Specifications 120VAC Input 18VAC Output 10-12 Amp Current Capacity Fuse: 2.5A/250V...

Ring Engineering RailPro PWR-56 Model Railroad Power Supply

PWR-56 Model Railroad Power Supply The PWR-56 is a Power Supply that can be used to supply track power for your locomotives, turnouts and other accessories. The PWR-56 has 56 Watts of output power! That is enough power to drive 15 or more typical modern...

MTH Z1000 Brick 100-Watt Transformer Power Supply

DCS users who don't need a conventional transformer and controller can use this 100 watt power supply for small and moderate sized layouts. Featurng a U.L. approved design & separate 14V AC Accessory Port, its robust design will provide years of...

NCE P514 12/13.8vDC 5 Amp 120-240vAC International Power Supply

NCE model P514 DCC system power supply with selectable 12/13.8vDC power and barrel plug connection. For use with NCE 5-amp Power Pro systems, PB5 booster, Power Cab SB5/DB5 boosters, and others. Specifications: Input: 100-240vAC,...