The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click OK to Accept Cookies to continue to use the site.
Long lasting, all-purpose saw.
Extra-fine teeth to make razor-smooth cuts in Wood, Plastic, Nickel-Silver.
Will also cut Copper, Formica, Aluminum, Masonite and most non-ferrous metals
Handle color may vary.
Rail joiners are a necessity for your model railroad layout, but they can be extremely rough on your fingertips while installing them. Well no longer because Atlas has the tool that will make installing rail joiners a snap, the Atlas Rail...
The LT1 is included with all Digitrax Starter Sets. It consists of a harness with 6 conductor Telco type wire and a male plug, a tester with a female 6 conductor jack and a protection resistor.
If you make your own LocoNet cables, this is a handy device...
The PR4 makes decoder programming and connecting your layout and computer extremely easy.
The PR4 seamlessly switches between computer interface and decoder programming modes automatically without having to press any buttons. The PR4 is electrically...
The Excel 13 piece hobby knife set comes in a wooden box and contains one each of K1, K2, and K5 knife handles and 10 assorted blades.
1 - K1 Light Duty Knife
1 - K2 Medium Duty Knife
1 - K5 Heavy Duty Knife
10 Blades: One Each of...
Excel Blades K1 hobby knife is 100% Made in the USA with a carbon steel straight edge blade built for trimming wood, plastic, paper and leather. Aluminum body fits with all standard craft knife blades including Xacto Knife. It has a snug fitting, shatter...
Indexed Metal Storage Case.
20 High Speed Carbon Steel Drill Bits
Sizes from #61 to #80 (.016" to .039") inclusive.
Set of two mini screw drivers.
1 #0 Phillips Screwdriver
1 1/8" Flat Blade Screwdriver
Shank Length: 2-3/4" on both
Constructed of 12 1/2" long non-glare gold anodized aluminum with black calibrations in N, HO, O and G (1/24) scales, 64th and mm along with a guide for converting decimal equivalents to drill sizes for small screws. The black photo-anodized calibrations...
Precision crafted to meet the needs of the most demanding hobbyist.
1/4" Anodized Aluminum Handle has a permanently mounted self-centering steel chuck.
Accommodates drill sizes from #52 (.0635) thru #80 (.0135)
Non-slip knurled surface for...
This sprue cutter is a super versatile tool with a flat blade design for close and accurate cutting of plastic sprues, resin and composite materials.
High Speed Steel
Steel Plug Tap
Maximum Pipe or Tube Diameter: 5/8 in.
Product Type: Pipe Cutter
Compatible Pipe Material: Copper, Aluminum, Brass and Thin Wall Tubing
Usage: Tubing Cutter
Material Finish: Aluminum
Minimum Pipe or Tube Diameter: 1/16 in.
Die-cast three point track gauge with centerline indicator. Code 83 on one side, code 100 on the other.
NEBO 6549 CRYKET CAMO Multicam LED FLASHLIGHT & WORKLIGHT
The NEBO CRYKET™ is an all around 3-in-1 LED flashlight that features a 240 lumen C•O•B work light, a bright 250 lumen spot light and an intense red light. ...
This little tester can test any 20ma LED (any color) without the need for a current limiting resistor. Just snap the tester on a standard 9-volt battery and start testing.
Accidental reverse connection will not harm LED. Accidental shorting of test...
This handy little tool safely yet firmly holds SMD LEDs, even tiny Nanos. A second padded clip holds wire for precise positioning during soldering operations.
Using this tool greatly simplifies LED preparation, making reliably wired LEDs a...
Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:
Gauge of track and turnouts
This is a .20 oz bottle of Z-71 Thread Locker from Pacer Technologies. Permanent strength red anaerobic threadlocker is resistant to gasoline, diesel, antifreeze, transmission fluid and oil. Prevents galling and corrosion of threads. Permanently locks...
This device is designed to measure the scale speed of locomotives or train cars that pass by it.
Two small light sensors mounted discretely under the rails are used to record the speed of anything passing over them and then the device calculates and...